ONELIGHT

Smart Light Bulb for ONEPHONE - User Manual

Contents

1. Overview 2. What’s Included 3. Setup & Pairing 4. Light Controls 5. Colors & Temperature 6. Managing Devices 7. Pro vs Lite Access 8. Troubleshooting

1. Overview

ONELIGHT is a smart light bulb for Second Life, designed to work exclusively with ONEPHONE 1 ULTRA. It is the first device in the ONEHOME smart home ecosystem.

With ONELIGHT, you can remotely control a physical light bulb rezzed anywhere in Second Life directly from your ONEPHONE - including turning it on and off, adjusting brightness, changing colors, and selecting color temperature presets.

2. What’s Included

Each ONELIGHT package contains:

A light bulb (2 LI) with bulb, lower body, and metal base.
The ONELIGHT script pre-installed inside the bulb - no additional setup required.

Requirement: You need an ONEPHONE 1 ULTRA HUD to control the ONELIGHT. The bulb does not function as a standalone device.

3. Setup & Pairing

Step 1: Install the ONEHOME App

Open the App Store on your ONEPHONE and install the ONEHOME app. This is where you will manage and control all your smart home devices.

Step 2: Rezz the Bulb

Find the ONELIGHT object in your Second Life inventory.
Rezz it on the ground or any surface where you want the light.
The bulb will automatically request a URL and register itself with the ONEPHONE server.
You will see two confirmation messages in local chat:
- ONELIGHT online: [URL] - the bulb has a communication channel.
- ONELIGHT registered with ONEPHONE server. - the server knows about this bulb.

Step 3: Pair the Bulb

Open the ONEHOME app on your ONEPHONE.
Tap the + (Add Device) button.
Your ONELIGHT should appear in the discovery list. It will show as “ONELIGHT” with its device UUID.
Tap Pair next to the device.
Enter a name for your bulb (e.g., “Living Room”, “Bedroom Lamp”).
The bulb is now paired and ready to control.

Tip: You can pair multiple ONELIGHT bulbs. Each one shows up as a separate device in your ONEHOME app.

4. Light Controls

Tap on any paired device in the ONEHOME app to open its control panel.

On / Off Toggle

Use the toggle switch to turn the light on or off. You can use the quick toggle on the device card in the list, or the larger toggle in the control panel.

On: The bulb emits light with the current brightness, color, and glow settings.
Off: The bulb returns to plain white with no glow, no light emission, and no color.

Brightness

Drag the brightness slider to adjust light intensity from 0% to 100%.

Brightness controls both the point light intensity and the glow amount on the bulb surface.
The slider updates smoothly without interrupting your drag - the command is sent when you release.

5. Colors & Temperature

Color Presets

Choose from 8 color presets to change the light color instantly:

Color	Hex Value
Red	#ff0000
Orange	#ff6600
Yellow	#ffcc00
Green	#00cc00
Blue	#0066ff
Purple	#6600cc
Pink	#ff00cc
White	#ffffff

Color Temperature Presets

Instead of a specific color, you can choose a color temperature to simulate different types of lighting:

Preset	Description	Appearance
Warm	Cozy, warm white	Yellowish glow
Neutral	Natural white	Slightly warm white
Cool	Cool white	Slightly blue-tinted
Daylight	Pure white	Clean white light

Note: Selecting a color temperature overrides the current color. Selecting a color preset overrides the current temperature. They are two different ways to set the bulb’s color.

6. Managing Devices

Renaming a Device

Tap the pencil icon in the control panel header to rename your device. Enter a new name and tap the checkmark to confirm.

Deleting a Device

Tap the trash icon in the control panel header to delete a device. A confirmation dialog will appear. Once deleted, the device is fully removed from your account.

Re-pairing: After deleting, you can re-pair the same bulb by taking it back into inventory and rezzing it again. It will re-register and appear in the discovery list.

7. Pro vs Lite Access

Access Method	Lite Plan	Pro Plan
SL HUD (in-world)	Full control	Full control
Web browser / PWA	Not available	Full control

Smart home device control from the web requires an active ONE Telecom Pro subscription. When using the phone through the SL HUD, all plans can control devices freely.

8. Troubleshooting

Bulb not appearing in Add Device

Check local chat for the registration confirmation messages. If you don’t see them, the script may not have loaded.
Wait a few seconds and try again - the discovery list refreshes every 5 seconds.
Make sure the bulb is owned by the same avatar as the ONEPHONE account. ONELIGHT registers under the owner’s UUID.
Try taking the bulb back to inventory and rezzing it again.

Bulb shows as offline (red dot)

The bulb may have lost its URL. This can happen after a region restart.
Take the bulb back to inventory and rezz it again - it will get a new URL and re-register.

Light not changing color or brightness

Make sure the light is turned on - color and brightness changes only apply when the light is on.
Check that the bulb is online (green dot) in the ONEHOME app.
If commands were working but stopped, the bulb may have lost its URL. Rezz it again.

Cannot control from web browser

Web/PWA access to smart home controls requires an active ONE Telecom Pro subscription.
Check your subscription status in Settings → ONE Telecom.

Multiple bulbs showing the same name

When pairing, give each bulb a unique name so you can tell them apart (e.g., “Living Room”, “Bedroom”).
You can rename an existing device from the control panel by tapping the pencil icon.